涂善东简介_涂善东个人资料_涂善东微博_百科网
A-A+

涂善东简介_涂善东个人资料_涂善东微博

2017-08-21 15:20:56 科学百科 阅读 7 次

简介/涂善东 编辑

涂善东
涂善东

涂善东,博士、教授、长江学者(2001)、国家杰出青年基金获得者(2002)。1988年于南京化工学院化工机械专业获工学博士学位,1989年-1990年在西南交通大学力学所从事博士后研究工作,1990年-1993年受邀担任瑞典皇家理工学院客席科学家(Guestscientist),1993年-2001年担任南京化工大学、南京工业大学副校长、机械工程学院副教授、教授、院长,1998年6月-12月韩国中央大学访问教授(Brainpoolscholar),2001年11月起担任华东理工大学化工过程机械学科教育部“长江学者奖励计划”特聘教授,2006年6月迄今担任华东理工大学副校长。

兼任国际压力容器学会亚太地区委员、国际机构学与机器科学联合会(IFToMM)可靠性委员会委员、中国机械工程学会压力容器学会荣誉理事长、材料学会理事长;他还担任了JAppliedEnergy,IntJofPresVesandPiping,JofMaterialsScience&Technology,FrontierofMechanicalEngineeringinChina,AdvancesinMechanicalEngineering、压力容器、机械工程材料等期刊、机械强度、功能材料及器件学报等期刊编委。

学术兼职/涂善东 编辑

诺丁汉大学荣誉教授、国际压力容器学会亚太地区主席、国际机构学与机器科学联合会(IFToMM)可靠性委员会委员、英国工程结构完整性联盟 (FESI)高级顾问、中国机械工程学会压力容器学会荣誉理事长、材料学会荣誉理事长;担任Journal of Applied Energy, International Journal of Pressure Vessels and Piping, Journal of Materials Science & Technology, Frontiers of Mechanical Engineering

, Advances in Mechanical Engineering、压力容器、机械强度、机械工程材料、应用基础与工程科学学报等期刊副主编或编委。兼任中航商发航空发动机寿命预测联合创新中心首席科学家、上海市航空发动机工程技术研究中心技术委员会主任

研究方向/涂善东 编辑

主要研究高温环境下的结构设计理论与寿命预测技术、微(小)化学机械系统(MCMS)、先进能源材料与装备,倡导全面工程教育。

获奖成果/涂善东 编辑

发表学术期刊论文250余篇,先后获国家科技进步一等奖1项,国家科技进步二等奖3项,国家发明二等奖1项,上海市自然科学一等奖1项,国家教学成果二等奖1项;出版着作3部、特刊与文集(英文)16本。1990年获第二届中国青年科技奖,1996年入选国家百千万人才工程、2002年被授予中华全国归国华侨联合会“科技进步带头人”称号,获国家杰出青年科学基金,2006年获教育部荣誉长江学者称号

着作与专辑/涂善东 编辑

涂善东. 高温结构完整性原理, 北京: 科学出版社, 2003.

涂善东等. 材料服役中表面的失效行为及防治. 见: 中国材料工程大典第16卷. 北京: 化学工业出版社, 2005.

涂善东等. 机械结构强度与失效,见:机械科学与制造-国家自然科学基金委员会十一五战略研究报告. 北京:科学出版社,2006.

涂善东. 过程装备与控制工程概论. 北京: 化学工业出版社, 2009.

涂善东等. 零件与结构的失效与安全服役. 见:机械工程学科发展战略报告(2011-2020). 北京:科学出版社, 2010.

王磊, 涂善东. 材料强韧学基础, 上海: 上海交通出版社, 2012.

Tu ST, Zhou GY. Compact Heat Exchangers in Clean Energy Systems. In Handbook of Clean Energy Systems, Wiley, 2014.

Fatemi A, PookLP, Spagnoli A, Tu ST (Guest Editor). Special Issue on ‘Multiaxial Fracture 2013’, Engineering Fracture Mechanics 2014; (Volume 123), Oxford: Elsevier.

Yan J, Chou SK, Tu ST, Jin HG, Desideri U (Guest Editor). Special Issue on Energy Innovations for a Sustainable World, Applied Energy 2013; (Volume 112), Oxford: Elsevier.

Tu ST, Wang GZ, Gong JM (Guest Editor). Special issue on Latest Development of Applied Materials Technology, Advanced Materials Research (Volume 509). Switzerland: Trans Tech Publications, 2012.

Tu ST, Takahashi Y (Guest Editor). Special issue on high temperature strength, Acta Metallurgica Sinica. Oxford: Elsevier. 2011.

Takahashi Y, Tu ST (Guest Editor). Special issue on high temperature strength, International Journal of Pressure Vessels and Piping. Oxford: Elsevier. 2009

.

任免信息/涂善东 编辑

2015年7月,教育部决定免去涂善东的华东理工大学副校长职务。

论着/涂善东 编辑

1. Wang N, Tu ST, Xuan FZ. (2013). "A novel prediction method of creeprupture life of 9-12% chromium ferritic steel based on abductive network."Engineering Failure Analysis.

2. Xu JS, Zhang XC, Xuan FZ, Tian FQ, Wang ZD, Tu ST. (2013). "Tensileproperties and fracture behavior of laser cladded WC/Ni composite coatings withdifferent contents of WC particle studied by in-situ tensile testing."Materials Science and Engineering a-Structural Materials PropertiesMicrostructure and Processing 560: 744-751.

3. Wen JF, Tu ST, Gao XL, Reddy JN. (2013). "Simulations of creepcrack growth in 316 stainless steel using a novel creep-damage model."Engineering Fracture Mechanics 98: 169-184.

4. Wang HT, Wang GZ, Xuan FZ, Tu ST. (2013). "Fracture mechanism of adissimilar metal welded joint in nuclear power plant." Engineering FailureAnalysis 28: 134-148.

5. Wang HT, Wang GZ, Xuan FZ, Tu ST. (2013). "An experimentalinvestigation of local fracture resistance and crack growth paths in adissimilar metal welded joint." Materials & Design 44: 179-189.

6. Wang HT, Wang GZ, Xuan FZ, Liu CJ, Tu ST. (2013). "Local mechanicalproperties of a dissimilar metal welded joint in nuclear powersystems."Materials Science and Engineering: A 568: 108-117.

7. Tan JP, Tu ST, Wang GZ, Xuan FZ. (2013). "Effect and mechanism ofout-of-plane constraint on creep crack growth behavior of a Cr–Mo–Vsteel." Engineering Fracture Mechanics 99: 324-334.

8. Huang YH, Tu ST, Xuan FZ. (2013). "Modeling and simulation of pitchemistry of 304 austenitic stainless steel under applied stress in sodiumchloride solution." Nuclear Engineering and Design 257: 45-52.

9. Gong N, Wang GZ, Xuan FZ, Tu ST. (2013). "Leak-before-breakanalysis of a dissimilar metal welded joint for connecting pipe-nozzle innuclear power plants." Nuclear Engineering and Design 255: 1-8.

10. Chen LY, Wang GZ, Tan JP, Xuan FZ, Tu ST. (2013). "Effects ofresidual stress on creep damage and crack initiation in notched CT specimens ofa Cr–Mo–V steel." Engineering Fracture Mechanics 97: 80-91.

11. Zhu ML, Xuan FZ, Du YN, Tu ST. (2012). "Very high cycle fatiguebehavior of a low strength welded joint at moderate temperature."International Journal of Fatigue 40: 74-83.

12. Yuan BX, Luan WL, Tu ST. (2012). "One-step synthesis of cubic FeS2and flower-like FeSe2 particles by a solvothermal reduction process."Dalton Transactions 41(3): 772-776.

13. Yuan BX, Luan WL, Tu ST. (2012). "One-step solvothermal synthesisof nickel selenide series: Composition and morphology control."Crystengcomm 14(6): 2145-2151.

14. Yuan BX, Hou XQ, Han YL, Luan WL, Tu ST. (2012). "Facile synthesisof flake-like FeSe2 particles in open-air conditions." New Journal ofChemistry 36(10): 2101-2105.

15. Yang XB, Tu ST. (2012). "The effect of a constraining metal tube onflux pinning induced stress in a long cylindrical superconductor." Journalof Applied Physics 112(2): 023909.

16. Yang XB, Tu ST. (2012). "Stresses from Oxide Film ImperfectionsDuring Metal Dusting." Oxidation of Metals 78(5-6): 295-305.

17. Xu JS, Zhang XC, Xuan FZ, Wang ZD, Tu ST. (2012). "Microstructureand sliding wear resistance of laser cladded wc/ni composite coatings withdifferent contents of wc particle." Journal of Materials Engineering andPerformance 21(9): 1904-1911.

18. Wang GZ, Li BK, Xuan FZ, Tu ST. (2012). "Numerical investigation onthe creep crack-tip constraint induced by loading configuration ofspecimens." Engineering Fracture Mechanics 79: 353-362.

19. Tan JP, Wang GZ, Xuan FZ, Tu ST. (2012). "Correlation of creepcrack-tip constraint between axially cracked pipelines and testspecimens." International Journal of Pressure Vessels and Piping 98:16-25.

20. Sun PJ, Wang GZ, Xuan FZ, Tu ST, Wang ZD. (2012)."Three-dimensional numerical analysis of out-of-plane creep crack-tipconstraint in compact tension specimens." International Journal ofPressure Vessels and Piping 96-97: 78-89.

21. Sun L, Luan WL, Shan YJ, Tu ST. (2012). "One-step synthesis ofmonodisperse Au-Ag alloy nanoparticles in a microreaction system."Chemical Engineering Journal 189: 451-455.

22. Lv YX, Yu XH, Tu ST, Yan JY, Dahlquist E. (2012). "Experimentalstudies on simultaneous removal of CO2 and SO2 in a polypropylene hollow fibermembrane contactor." Applied Energy 97: 283-288.

23. Lv YX, Yu XH, Jia JJ, Tu ST, Yan JY, Dahlquist E. (2012)."Fabrication and characterization of superhydrophobic polypropylene hollowfiber membranes for carbon dioxide absorption." Applied Energy 90(1):167-174.

24. Luan WL, Yang HW, Wan Z, Yuan BX, Yu XH, Tu ST. (2012)."Mercaptopropionic acid capped CdSe/ZnS quantum dots as fluorescence probefor lead(II)." Journal of Nanoparticle Research 14(3)

25. Liu ZD, Zhang XC, Xuan FZ, Wang ZD, Tu ST. (2012). "In situsynthesis of TiN/Ti3Al intermetallic matrix composite coatings on Ti6Al4Valloy." Materials & Design 37: 268-273.

26. Lin Y, Yu XH, Wang ZY, Tu ST, Wang ZD. (2012). "Laminar flowdiffusion interface control in a microchannel with accurate Ramanmeasurement." Chemical Engineering and Processing 57-58: 1-7.

27. Jiang WC, Zhang YC, Woo W, Tu ST. (2012). "Three-dimensionalsimulation to study the influence of foil thickness on residual stress in thebonded compliant seal design of planar solid oxide fuel cell." Journal ofPower Sources 209: 65-71.

28. Jiang WC, Xu XP, Gong JM, Tu ST. (2012). "Influence of repairlength on residual stress in the repair weld of a clad plate." NuclearEngineering and Design 246: 211-219.

29. Jiang WC, Woo W, Wang BY, Tu ST. (2012). "A study of residualstress in the repair weld of stainless steel clad plate by neutron diffractionmeasurement and finite element method." Acta Metallurgica Sinica 48(12):1525-1529.

30. Jia YF, Xuan FZ, Tu ST. (2012). "A modified analysis forthermal-mechanical properties of staggered structure in biomimeticmaterials." Journal of the Mechanical Behavior of Biomedical Materials 16:109-120.

31. Jia JH, Hu XY, Wang N, Tu ST. (2012). "Test verification of anextensometer for deformation measurement of high temperature straightpipes." Measurement 45(7): 1933-1936.

32. Hu MH, Tu ST, Xuan FZ, Xia CM, Shao HH. (2012). "Strain energynumerical technique for structural damage detection." Applied Mathematicsand Computation 219(5): 2424-2431.

33. Fu HH, Luan WL, Yuan BX, Tu ST. (2012). "Nanocrystal/Polymer SolarCell." Progress in Chemistry 24(9): 1837-1844.

34. Fu HH, Luan WL, Tu ST. (2012). "A simple route for synthesis ofPbSe nanocrystals: Shape control by ligand and reaction time." DaltonTransactions 41(39): 12254-12258.

35. Fu HH, Choi MJ, Luan WL, Kim YS, Tu ST. (2012). "Hybrid solar cellswith an inverted structure: Nanodots incorporated ternary system."Solid-State Electronics 69: 50-54.

新款女性防摔手机壳,限时促销...
立即购买